- 1 Andis Excel Pro-Animal 5-Speed Detachable Blade Clipper Kit
- 2 Why Are These Clippers here? Best for Small or thick haired dogs
- 3 Specification:
- 4 Check Carefully Because…
- 5 The Must Know True Facts About the Andis Excel Dog Clipper
- 6 What to Watch Out for With This Product
- 7 Crucial Tips
- 8 Benefits and Features
- 9 Pros
- 10 Some Problems You May Face
- 11 Cons
- 12 Conclusion
- 13 Technical Details
Do you own your own grooming salon, or aspire to work in one? If so, one of the problems you may have come across is deciding which type of clippers to use when it comes to grooming your dogs. Let’s face it- even though they are not technically your dogs, you would treat them as if they were your own.
The professional animal clippers by Andis Excel are complete with a powerful type of motor that will not only get the job at hand done, but it will get it done with excellence.
Why Are These Clippers here? Best for Small or thick haired dogs
There are a variety of professional animal clippers out there, all claiming that they have the features that distinguish them from others. How is it possible to tell which ones are bragging about the proper characteristics? The important qualities to look out for in an animal clipper rely partly on what exactly they are intended for.
For instance, as a professional groomer, you will want to buy a device that has a powerful motor and that is able to handle grooming a large quantity of dogs whereas a personal dog owner may be able to get away with handling a less powerful razor.
This razor by Andis Excel has not one, but five different speed settings. This serves as a great benefit to groomers for a few different reasons. First of all, having multiple speeds available within one animal clipper allows for convenience. Think about it! If one dog comes into the salon and has very thin fur, and the next dog that comes in has tremendously thick fur, it would be a pain to keep switching your razors, especially if that uneven fur pattern persists throughout the day.
It would be so much more convenient to have a razor with multiple settings so that you may be able to switch speeds with ease. Second of all, having a clipper with multiple high speeds available is useful for when you have a long day. Having high speed settings will enable you to groom more dogs for an extended period of time than solely low speeds would allow for. Also, having low speed settings will even be beneficial when you are grooming areas even on a larger dog that may be sensitive.
Finally, there is another benefit to having multiple speeds in one razor that might be thought of less but it is equally important. What if you make an appointment for a dog that has fur of varying lengths? It would be a hassle to continuously switch out different razors in order to make one complete look. With this multi-purpose clipper, you will be able to give every dog a clean finish and it will result in a satisfied customer as well.
Some dog owners may require or request that their dog’s fur be cut in a specific way. This is also a scenario that will whole-heartedly welcome a razor with multiple speeds. The more complicated the request is, the more thankful you will be that this clipper has multiple speeds. If a request is complex, it may be because the owner wishes their dog to have fur of varying lengths. While it may take time to be fully confident in successfully satisfying these requests, it will be easier to follow through with the request if you use these as opposed to a clipper with only one speed setting.
The specific type of motor that was used in the creation of this clipper is a rotary motor. This powerful type of motor is meant to be used on more than just one dog. It has the capability to cut through the coarse fur that is found on many larger dogs. The power behind this motor will also enable you to quickly cut through matted fur easily, which could potentially keep the dog you are grooming calmer than they would be if you were using a motor with less power.
Multiple customers have made remarks about the wonderful tradeoff that accompanies the purchase of this product. Seeing as how a trip to the grooming salon is not exactly a cheap endeavor, it is important to make the trip worthwhile for both yourself and your customers. On the one hand, you do not want to be left with major feelings of frustration by the end of the day from your clippers constantly malfunctioning.
On the other hand, you do not want to spend a fortune on a pair of clippers when it may take a while to gain enough money back to where you break even. One aspect of these clippers that makes them well-admired is the fact that the cost of purchasing them is worth the amount of use that comes out of them.
After you are done using the clippers, they conveniently stay on the speed that you left them on. This is just one more reason why this razor is easy to use. When you turn them back on, you can continue where you left off instead of having to continuously re-set the speed. This is especially helpful if you are having a day where you turn off the device multiple times so that it can cool down before further use.
- Motor type: rotary
- Type of blades: no.
- Cord/Cordless charge: Charges with cord
- Maintenance: Use oil to clean with
- Heat: Sometimes overheats with too much use
- Noise: Quieter than other, similar clippers
- Dynamics: Small and lightweight
Check Carefully Because…
Unfortunately, this item does not come with replacement blades. However, you are able to buy blades of the same type from a separate place, and then replace them. This may be a wise idea if you are planning on using this item for long periods of time. Being able to switch out the blades occasionally will prevent the blades from overheating, which will be an advantage for both you and your pup that you are working on.
There are knock off brands out there that appear to be very similar to this brand. Make sure that you check the brand name carefully if you are searching for the dog clipper by Andis Excel. It has been reported that customers who have bought another brand, thinking that it was this one, have had more problems with their product. For instance, one customer claimed that they heard a loud, unusual buzzing noise coming from the razor.
With that being said, hearing a little bit of noise coming from even a professional clipper is normal. However, if your product ends up being unusually loud, make sure you contact the company that sold it to you and explain to them your concerns. It could be a normal effect of the device working or it could be something that needs to be looked at with urgency. You are better off safe than sorry, especially when you bring precious animals into the mix.
This device was made to successfully work in the United States. It is not compatible with an outlet from another country and so cords for this item that plug into different outlets are not available.
While some other devices that are similar in nature come with a case, this razor in particular, does not. Be sure that you are still careful with the device when storing it away for further use. Ensure that you have removed all fur from the last customer before you put it away. Also, make sure that it is washed and dried.
These factors are not only important for the sake of having respect for the purchase you made but they are also important because these actions could also allow your razor to continue to cut through fur easily. These actions may even prevent overheating of the razor, to some extent.
The Must Know True Facts About the Andis Excel Dog Clipper
Many customers have bragged on the great value that is associated with the Andis Excel clippers. According to a variety of groomers who have bought the product, this device is light in weight and easy to handle. This makes it easier on your arms than other products of the similar nature, which is a huge benefit in itself.
After all, your arms can get tired after using them to groom your furry clients for a full day. Because it is lightweight, it is easier to maneuver than a bulkier razor would be. This will, in effect, allow your dogs to come out with a cleaner looking fur coat. Plus, the cord attached to these clippers is an amazing fourteen feet long. This will make it even easier to be agile while giving your customers a cut that will end up looking spectacular.
While you are using these clippers, it is important to note that you should be using them in the same direction as the dog’s fur is growing. The dog you are working on may not fully understand and appreciate what you are doing, but they will notice if you do not do this.
If you shave off the fur in the opposite manner, that is, against the direction that their fur is growing, this could cause your dog to feel discomfort. Try to think about this detail before you start grooming your client. After getting used to grooming your dogs in this manner, this action will become second nature to you.
What to Watch Out for With This Product
This item has been known to overheat when used for long periods of time. If you are too concerned about this overheating, use it on lower speeds when possible. This will potentially allow you to use it for longer stretches of time than if you were to use it on the higher speeds. If you need to use this clipper on higher speeds for extended periods of time, then be sure to unplug it when you feel that it is warming up too much. During this time, you can bond with the dog you are working on or take time to organize your other materials.
You may also use that time to cut fur in fragile areas, such as near their ears. You may do so with a pair of scissors or with another, lower speed clipper if you have one. Try to make the most of your time so that you can keep the process running along smoothly. You can even take this period of time to calm the dog down or give them a break if they are scared of the noise or sight of the clippers. They may not be used to them. A dog that is particularly skittish may appreciate this break from being fully groomed.
There have been reported some problems with the on and off switches not working as they should. If you make this purchase, and there is a malfunction, be sure to get a hold of the distributor. Even more beneficial for yourself, a good idea before making the purchase is to make sure that you completely understand the conditions of the warranty that is attached with your decision.
This will allow for less frustration if you go ahead with the purchase and the product is not working as it is supposed to. Knowing beforehand what is covered through the warranty can help alleviate the stress that can accompany a product that is having problems. Nobody likes to deal with hard issues but there are ways to make a faulty purchase smooth over a little better.
One of the advantages of this clipper is that you are able to replace the razor with another. However, when you buy this clipper, it only comes with the one razor. While it is a smart idea to purchase multiple razors so that you can switch out the blades if they become too hot, make sure that the brand is still Andis. Double-check this detail so that you are not left with expensive blades lying around the house that are of no use.
- Clean device consistently with oil. This will allow it to work better, longer.
- Thankfully, this clipper in particular allows for the exchange of the current blade with another blade, as long as it is the same type. Buy extra blades to replace the current blade before it has the chance to overheat.
- Take breaks with use, as needed. This will prevent it from overheating, and possibly calm dogs that become easily scared by the noise of it.
- The more you strive to maintain these clippers, the longer these will be able to last.
- Keep the razor sharp and make sure that it is oiled. This will enable the device to better do its job, for longer periods of time.
- If you do not already have this, cooling spray would be a good thing to buy. This will help prevent the razor from being too hot, especially if you are using it for multiple dogs in a row. Your dog clients will appreciate this as well as their owners.
- Because overheating seems to be a one of the biggest hindrances to this product, finding as many ways as possible to prevent this will leave everyone a little bit happier. Before using this product, if you are able to, wash and dry the dog that you are about to work on. This will further prevent the blade you are using from overheating.
- If you need to change the blade, know that for most clippers, the motor should be running while doing so.
- Ensure that the dog you are working on is dry before you use the clippers on them.
- It is a good idea to start the grooming process at the top of the neck as well as the dog’s back. Then, continue cutting the fur down along one side.
- Find a pattern of grooming that works for both you and your dog and continue on with it. This may make your dogs more comfortable with the whole process. This will also allow you to become faster and more efficient when it comes to taking care of your dog clients.
- For skittish dogs, it may be a good idea to start cutting fur in a small area at first. This will enable you to see how they react to the razor when being used on them.
Benefits and Features
These clippers will present you with a variety of advantages for both you and your furry client. The strong motor within these clippers will allow you to cut through even the most coarse of fur with ease. Do you sometimes get dogs that come into the grooming salon with matted fur?
This can happen to even well-kept dogs and can become painful for them if left untended for a long stretch of time. Be sure to tell your clients about this so that they will be motivated to either fix the matted fur or take them in to get groomed. If the fur becomes too tangled, it is better to shave off the fur than to try to untangle it manually, which may cause more distress for the dog. As a professional groomer, you may be the one to prevent some pups with difficult fur from becoming stressed out.
It has been noted that this razor is quiet in a comparative sense. While it does make some noise, as it obviously does have a motor, it has been known to be quieter than other brands of clippers. This is especially helpful for those dogs that seem to become scared by even the smallest of noises. If necessary, allow the dog you are working on to become familiar with the look and sound of the razor before you turn it on. This will hopefully create a bond between you and the skittish dog and will help relax them before you begin your work.
Another good piece of news about this item is that it will work for a full body fur cut as well as just a trim. The reason that this device is successful for both situations is that it has multiple speeds and a strong motor. The lower speeds could be beneficial when just giving a trim.
However, the higher speeds will also serve the purpose of giving a trim if the dog being worked on has thick, coarse, or matted fur. The powerful motor is beneficial for giving an allover cut because it will be able to stand being used for the duration of the cut. So whether you are looking to use this item for just a few minutes or for quite some time, this particular device can accommodate both situations.
- Five different speeds available
- Rotary motor
- Powerful enough for professional groomer
- Easily cuts through matted fur
- Can use to cut fur of different lengths
Some Problems You May Face
While the clipper itself is tiny and light in weight, some customers have had problems with the cord being too heavy. The long length of the cord (fourteen inches) may outweigh the problem of the cord being too heavy because the length of the cord will allow you to move the device around easily.
However, you will have to decide if this is a big matter to you and your business. Another issue that some customers have claimed having with the cord is that is sometimes has shorts. It is worth looking at all of the aspects of this product before making your decision.
It is so important to know that cleaning is essential when owning a pair of clippers. It is not difficult to maintain, but it is necessary. By cleaning the razor between each use, you will allow the life of the razor to live up to its full potential. This will also help the razor to run smoothly over your next client’s fur. If you skip the cleaning process, you potentially run the risk of snagging the fur of one of your pups.
Allow the excellence behind your business to be seen even in the smallest of details. While cleaning the razor may only take a couple of minutes, by creating a habit of it, you will be preventing angry customers for perhaps the duration of your grooming business. A few small steps in the right direction with this business can lead to lasting results that will allow your grooming salon to stand out and show that you care.
Upkeep of the razor that you use consistently is important. Gaining the trust of your dog clients and their owners as well, is perhaps the most important thing you can do when it comes to running your own grooming salon. This clipper will help you to, in part, gain some of that trust effortlessly. If the owner sees that their dog is happy with the visit and that they come out with a clean-looking coat of fur, there will be a better chance of them bringing their dog to you next time.
Some customers have also reported that they do not particularly care for the placement of the on and off buttons. They are located on the side of the clippers and with some customers, they have gotten in the way while on the job. While this may be a minor detail, it could be something that could hinder your experience with grooming your dogs.
- Overheats on high speeds
- Overheats from overuse
- Cord is heavy
- Does not come with a case
Overall, there are many advantages that accompany these dog clippers for professional groomers. They are user-friendly in the sense that they are light in weight, making it easier for you to work your way around your dogs in an easier manner. One of the best features on these clippers is the ability to switch to different speeds without having to switch out your razor.
When you buy these clippers, you have the capability to run it on a low speed, for small dogs or dogs with thinner fur, or you can even use it for any type of dog while shaving the more sensitive areas. Sometimes it is worth it to pay more for a device that you use constantly, and in this case, it is worth it. As a groomer, you will want to confidently reassure your clients that you are using the best of materials for taking care of their dogs.
Because a clipper is of utmost importance to a groomer’s business, you will want to invest in one that is high quality. Considering the amount of boxes that this Andis Excel dog clipper checks off, you can believe that this will worth the purchase. The pros outweigh the cons. What’s even better is that these clippers don’t just check the boxes on a superficial level, but many customers have confirmed that this item truly exceeded their expectations.
- Outside of clippers made of polymer
- Razor made for one hundred ten volts NOT two hundred twenty volts
- Frequency is thirty hertz
- Ceramic blade (size ten)
- Blade can be removed and replaced
- Does not come with extra blades in package
- Lowest speed is 2500 Strokes Per Minute (STM)
- Highest speed is 4500 Strokes Per Minute (STM)